How to Use a Hoover SteamVac Agility for Optimal Cleaning

How to Use a Hoover SteamVac Agility for Optimal Cleaning

Key Features of the Hoover SteamVac Agility

Here are some of the standout features of the Hoover SteamVac Agility:

  • 12 amp motor – Provides strong suction power for lifting dirt from carpets.
  • Deep cleaning mode – Uses brushes and suction to loosen and remove embedded dirt.
  • Powered hand tool – For cleaning upholstery, stairs, and hard-to-reach spots.
  • Dual tanks – Separate clean and dirty water tanks for efficient cleaning.
  • Automatic detergent mixing – Mixes water and detergent so you don’t have to.
  • 7 ft hose – Allows you to clean stairs and furniture without moving the upright.

How Does the Hoover SteamVac Agility Clean Carpets?

The Hoover SteamVac Agility uses Hoover’s heated cleaning solution and brush agitation to loosen and remove dirt from carpets. Here is an overview of the cleaning process:

  1. Fill the clean water tank with hot tap water and add Hoover cleaning solution.
  2. Turn on the SteamVac to activate the automatic detergent mixing system.
  3. The brushes spin and dispense the detergent solution onto the carpet.
  4. The brushes scrub the carpet loosen embedded dirt and stains.
  5. Powerful suction removes the dirtied water and deposits it into the dirty water tank.
  6. Clean water continues to flow to the brushes to rinse the carpet of detergent residues.
  7. The carpet is left clean and nearly dry after just a few minutes.

Tips for Getting the Best Cleaning Performance

Follow these tips when using your Hoover SteamVac Agility to get the deepest, most thorough carpet cleaning:

  • Thoroughly pre-vacuum carpets before steam cleaning.
  • Fill detergent to the recommended fill line in the clean water tank.
  • Use hot tap water for improved cleaning performance.
  • Remove furniture and obstructions from the area to be cleaned.
  • Work in small sections going back and forth slowly.
  • For heavily soiled areas, repeat passes for improved cleaning.
  • Empty the dirty water tank before it reaches the full line.
  • Rinse with plain water to remove detergent residue.
  • Allow carpets to fully dry before walking on them.

Maintenance Tips

Follow these maintenance practices to keep your Hoover SteamVac cleaning effectively:

  • Change the filter every 3-6 months for peak performance.
  • Use genuine Hoover detergents designed for SteamVac cleaners.
  • Remove and rinse the brushes monthly to prevent buildup.
  • Empty and rinse out tanks after each use.
  • Wipe down exterior to remove dirt and debris.
  • Inspect hoses and nozzles for obstructions or damage.
  • Store upright with tanks and hoses attached to prevent leaking.

Troubleshooting Common Issues

Here are some steps to take if you experience problems with your SteamVac Agility:

  • Won’t spray solution – Check that the clean water tank has detergent and the valve is open.
  • No suction – Clean or replace filter, empty dirty tank, and check for clogs.
  • Leaking water – Check tank seals and connections for damage.
  • Not cleaning well – Rinse out brushes, flush hoses for clogs, and check belt condition.
  • Won’t turn on – Check cord connections, reset breaker if needed, test in another outlet.

Is the Hoover SteamVac Agility a Good Choice?

The Hoover SteamVac Agility earns very positive reviews from owners for its cleaning performance. It is an ideal machine for deep cleaning carpets thanks to features like the heated cleaning mode, powered hand tool, and dual tank system.

The powerful 12 amp motor provides strong suction for lifting dirt. The included hose and tools allow you to easily clean stairs, upholstery, and vehicles as well. The automatic detergent mixing system makes it simple to get the right solution mix.

Overall, the Hoover SteamVac Agility is an excellent choice for those wanting an effective upright carpet cleaner at a reasonable price. With proper maintenance, this machine should provide many years of deep cleaning for your home‘s carpets.