Hoover Floormate Parts: Where to Find Replacement Parts for Your Hoover Floormaster

Hoover Floormate Parts: Where to Find Replacement Parts for Your Hoover Floormaster

Common Hoover Floormate Parts to Replace

Here are some of the Hoover Floormate components that most frequently require replacement:

Brush Rolls

The brush rolls are responsible for scrubbing and agitating the floor surface to loosen up dirt. Over time, the bristles can become worn down or damaged. Replacing the brush rolls restores scrubbing performance.

Drive Belts

Drive belts power the brush rolls. Stretching, cracking, or breaking can cause the belts to lose grip and slip. Replacing stretched drive belts gets the brush rolls spinning properly again.

Squeegees

Squeegees wick up the dirty water from floors. Cracks or tears in the rubber squeegees reduces suction power. Installing new squeegees improves wet pickup.

Pump Filters

Pump filters screen out debris to protect the pump. If the filter gets clogged, water flow is restricted. Swapping dirty filters for clean ones optimizes water flow.

Solution Tanks

Solution tanks hold the cleaning formula. Cracks or damage can cause leaks. Replacing a damaged tank stops leaks.

Hose Handles

Twisting the hose handle dispenses cleaning solution. If the mechanism inside the handle breaks, no solution will dispense. Replacing the hose handle restores solution flow.

Where to Purchase Hoover Floormate Parts

You have several options for purchasing genuine OEM Hoover Floormate parts:

  • Hoover’s Website – You can order parts directly from Hoover. Their website has an interactive diagram to find your model’s parts.
  • Appliance Parts Stores – Local appliance parts suppliers may carry common Floormate components in stock. This allows you to get parts same-day.
  • Online Parts Retailers – Websites like RepairClinic.com have a full selection of Hoover parts that can be shipped to your home.
  • Hardware Stores – Some Floormate parts like drive belts may be available in local hardware stores.

Genuine Hoover parts cost more than generic off-brand parts but are engineered for proper fit and performance. Consider the cost vs quality tradeoff when sourcing replacement parts.

Identifying Your Hoover Floormate Model

To find the correct replacement parts for your Floormate, you’ll need to know the appliance’s complete model number. Here are some tips for identifying your model:

  • Check the rating label – The rating label on the back or bottom of the unit lists the model number.
  • Look up the manual – The front cover of the owner’s manual will have the full model number.
  • Hoover’s website has a model finder tool you can use if unsure of the number.

Some examples of common Floormate model numbers include:

  • FH40010B – Floormate Deluxe
  • FH40150 – Floormate Jet
  • FH40520PC – Floormate Deluxe with SpinScrub

Knowing the model ensures compatibility and fit when ordering replacement parts.

Removing and Replacing Hoover Floormate Parts

When your new Floormate parts arrive, you’ll need to know how to properly remove the old parts and install the new replacements. Here are some tips:

  • Consult the owner’s manual – Step-by-step instructions are provided for replacing common parts.
  • Unplug the unit – Always unplug before disassembling for safety.
  • Use screwdrivers – Phillips and flathead screwdrivers allow safe removal of screws and covers.
  • Avoid forcing – Parts should come out and go in without too much force.
  • Double check connections – Confirm hoses, wires and parts are firmly secured after replacing.

Take pictures of the existing setup before taking pieces apart. This helps for reassembly. Refer to the manual if you get stuck. Finally, test it out to make sure the new parts function properly before using your Floormate again.

Troubleshooting Hoover Floormate Issues

Sometimes floor cleaner problems arise from failing parts. Here are solutions to common Floormate issues:

Not Picking Up Water

If the Floormate isn’t sucking up dirty water, check the condition of the squeegees and hoses. Worn squeegees or clogged hoses prevent proper wet pickup. Replace as needed.

Brush Not Spinning

If the brushes stopped spinning, the problem could be a worn drive belt. Open it up and inspect the belt. If stretched or damaged, fitting a new drive belt will restore brush operation.

Leaking Water

Leaks most often stem from cracked solution tanks or failed pump seals. Replace the tank or seal kit to stop the leaks.

Not Dispensing Cleaner

No cleaning solution coming out when twisting the hose handle indicates a damaged hose assembly. The internal mechanism needs replacing.

Conclusion

Hoover Floormate scrubbers are built to last, but may eventually need new parts. This guide covers the key replacement components, where to source genuine Hoover parts, how to identify your model, repair steps, and troubleshooting tips. With this information, you’ll be prepared to fix your Floormate to keep your floors looking their best.